Done right. First time. On time.

Powder, liquid and specialty coatings for parts that have to be right, cured in one of the largest industrial ovens in New England.

Send a drawing
Coat 00% Drawing

01The oven

Large assemblies. One full cure.

One of the largest industrial curing ovens in New England. Large assemblies, complex geometries and mission-critical parts go through a full, controlled cure, not a workaround sized for small brackets.

An operator opening the doors of a curing oven, parts glowing inside
  • Cure oven30×10×10ft
  • Walk-in batch ovens5
  • Paint and powder booths7
  • Overhead conveyor lines2
  • Blast room22×40ft

Fig. 1 Cure oven and shop figures

  • Vapor degreasing
  • Ultrasonic cleaning
  • High-temp processing

02

One prototype. A full production lot.

03Capabilities

Every finish the print calls for.

  • Powder

    Epoxy, polyester, super-durable polyester, urethane, TGIC, hybrid, textures, metallics

  • Liquid

    Class A/B spray painting: epoxy, polyurethane, enamel

  • Non-stick

    PTFE, PFA, FEP

  • Dry film

    Solid film lubricants: molybdenum disulfide, PTFE, graphite

  • Resistant

    Chemical, corrosion and tamper: CARC, ceramic, Xylan, Halar, Kynar

  • Prep

    Media blasting and surface preparation

Pick a coat

Screen approximations. The RAL fan deck is binding.

  • Conductive RFI/EMI coatings
  • Static-dissipative powder
  • Masking to the print: ground pads, hinge faces, gasket lands, EMI strips

04

Who we work for.

  • 01

    OEMs

    Production lots, coated to the drawing, delivered on the date.

  • 02

    Small-batch suppliers

    Short runs held to the same control as long ones.

  • 03

    R&D

    The single intricate prototype that has to be right.

05Data center, power, transfer switches, enclosures

The enclosure, finished to the print.

Powder and liquid finishes for the enclosure. Conductive RFI/EMI coatings where the drawing calls for them.

Datasheet, enclosures and power10 parts

  1. 01Racks and cabinets
  2. 02Containment
  3. 03Busway covers
  4. 04PDU / UPS enclosures
  5. 05Cable tray
  6. 06Switchgear
  7. 07Generator and UPS housings
  8. 08Transformer cabinets
  9. 09Transfer switches
  10. 10Electrical enclosures
  • Doors
  • Seams
  • Ground points

Masking so doors, seams, and ground points still make contact.

06

Standards we coat to.

  • AAMA 2604/2605

    Organic coatings on architectural aluminum: color, gloss and weathering.

    1 of 5
  • ISO

    Documented process, traceability and inspection, part one to part one thousand.

    2 of 5
  • NEPCOAT

    Protective coatings for New England bridges and steel structures.

    3 of 5
  • NADCAP

    Special-process control for aerospace: pretreatment, cure, inspection, records.

    4 of 5
  • MIL-SPEC

    MIL-PRF, MIL-DTL and CARC systems for defense work.

    5 of 5

07Process

How a job moves.

  1. 01

    Drawing

    Part, substrate, lot size and spec.

  2. 02

    Prep

    Media blasting, vapor degreasing, ultrasonic cleaning, pretreatment.

  3. 03

    Mask

    Ground pads, hinge faces, gasket lands and EMI strips, masked to the print.

  4. 04

    Coat

    Powder or liquid, film build to the spec.

  5. 05

    Cure

    A full, controlled cure, large assemblies included.

  6. 06

    Ship

    Inspected, documented, on the dock on the date.

08

Send the drawing.

JobRequest for quote

Part, substrate, lot size and spec. We quote to the drawing.

Shop
11 Old Worcester Rd, Webster, MA 01570